Review of surface dose detectors in radiotherapy
| dc.contributor.author | O'Shea, E. | |
| dc.contributor.author | McCavana, P. | |
| dc.date.accessioned | 2017-05-29T14:36:31Z | |
| dc.date.available | 2017-05-29T14:36:31Z | |
| dc.date.issued | 2006-11-20 | |
| dc.identifier.citation | Review of surface dose detectors in radiotherapy 2006, 3 (02):69 Journal of Radiotherapy in Practice | en |
| dc.identifier.issn | 1460-3969 | |
| dc.identifier.issn | 1467-1131 | |
| dc.identifier.doi | 10.1017/S1460396903000049 | |
| dc.identifier.uri | http://hdl.handle.net/10147/621396 | |
| dc.description.abstract | Several instruments have been used to measure absorbed radiation dose under non-electronic equilibrium conditions, such as in the build-up region or near the interface between two different media, including the surface. Many of these detectors are discussed in this paper. A common method of measuring the absorbed dose distribution and electron contamination in the build-up region of high-energy beams for radiation therapy is by means of parallel-plate ionisation chambers. Thermoluminescent dosimeters (TLDs), diodes and radiographic film have also been used to obtain surface dose measurements. The diamond detector was used recently by the author in an investigation on the effects of beam-modifying devices on skin dose and it is also described in this report | |
| dc.language.iso | en | en |
| dc.relation.url | http://www.journals.cambridge.org/abstract_S1460396903000049 | en |
| dc.rights | Archived with thanks to Journal of Radiotherapy in Practice | en |
| dc.subject | RADIOTHERAPY | en |
| dc.subject | MEDICAL DEVICES | en |
| dc.title | Review of surface dose detectors in radiotherapy | en |
| dc.type | Article | en |
| dc.identifier.journal | Journal of Radiotherapy in Practice | en |
| dc.description.funding | No funding | en |
| dc.description.province | Leinster | en |
| dc.description.peer-review | peer-review | en |
| refterms.dateFOA | 2018-08-27T21:25:55Z | |
| html.description.abstract | Several instruments have been used to measure absorbed radiation dose under non-electronic equilibrium conditions, such as in the build-up region or near the interface between two different media, including the surface. Many of these detectors are discussed in this paper. A common method of measuring the absorbed dose distribution and electron contamination in the build-up region of high-energy beams for radiation therapy is by means of parallel-plate ionisation chambers. Thermoluminescent dosimeters (TLDs), diodes and radiographic film have also been used to obtain surface dose measurements. The diamond detector was used recently by the author in an investigation on the effects of beam-modifying devices on skin dose and it is also described in this report |
