Show simple item record

dc.contributor.authorButt, Ahsan Javed
dc.contributor.authorShaikh, Aamir Hassan
dc.contributor.authorCameron, Hugh U
dc.date.accessioned2014-02-24T11:41:43Z
dc.date.available2014-02-24T11:41:43Z
dc.date.issued2013-02
dc.identifier.citationCoupling failure between stem and femoral component in a constrained revision total knee arthroplasty. 2013, 23 (2):162-3 J Coll Physicians Surg Paken_GB
dc.identifier.issn1681-7168
dc.identifier.pmid23374527
dc.identifier.doi02.2013/JCPSP.162163
dc.identifier.urihttp://hdl.handle.net/10147/313284
dc.description.abstractKnee revision using constrained implants is associated with greater stresses on the implant and interface surfaces. The present report describes a case of failure of the screw coupling between the stem and the femoral component. The cause of the failure is surmised with outline of the treatment in this case with extensive femoral bone loss. Revision implant stability was augmented with the use of a cemented femoral stem, screw fixation and the metaphyseal sleeve of an S-ROM modular hip system (DePuy international Ltd).
dc.language.isoenen
dc.rightsArchived with thanks to Journal of the College of Physicians and Surgeons--Pakistan : JCPSPen_GB
dc.subject.meshAged
dc.subject.meshArthroplasty, Replacement, Knee
dc.subject.meshCementation
dc.subject.meshFemoral Fractures
dc.subject.meshHumans
dc.subject.meshMale
dc.subject.meshPeriprosthetic Fractures
dc.subject.meshProsthesis Failure
dc.subject.meshReoperation
dc.subject.meshTreatment Outcome
dc.titleCoupling failure between stem and femoral component in a constrained revision total knee arthroplasty.en_GB
dc.typeArticleen
dc.contributor.departmentDepartment of Trauma and Orthopaedic Surgery, UPMC, Beacon Hospital Dublin, Ireland.en_GB
dc.identifier.journalJournal of the College of Physicians and Surgeons--Pakistan : JCPSPen_GB
dc.description.fundingOtheren
dc.description.provinceLeinsteren
dc.description.peer-reviewpeer-reviewen
html.description.abstractKnee revision using constrained implants is associated with greater stresses on the implant and interface surfaces. The present report describes a case of failure of the screw coupling between the stem and the femoral component. The cause of the failure is surmised with outline of the treatment in this case with extensive femoral bone loss. Revision implant stability was augmented with the use of a cemented femoral stem, screw fixation and the metaphyseal sleeve of an S-ROM modular hip system (DePuy international Ltd).


This item appears in the following Collection(s)

Show simple item record