Bonding auto-polymerising acrylic resin to acrylic denture teeth.

Hdl Handle:
http://hdl.handle.net/10147/124257
Title:
Bonding auto-polymerising acrylic resin to acrylic denture teeth.
Authors:
Nagle, Susan; Ray, Noel J; Burke, Francis M; Gorman, Catherine M
Affiliation:
University Dental School and Hospital, University College Cork, Ireland.
Citation:
Bonding auto-polymerising acrylic resin to acrylic denture teeth. 2009, 17 (3):134-6 Eur J Prosthodont Restor Dent
Journal:
The European journal of prosthodontics and restorative dentistry
Issue Date:
Sep-2009
URI:
http://hdl.handle.net/10147/124257
PubMed ID:
19839190
Abstract:
This study investigated the effect of surface treatments on the shear bond strength of an auto-polymerising acrylic resin cured to acrylic denture teeth. The surface treatments included a combination of grit-blasting and/or wetting the surface with monomer. Samples were prepared and then stored in water prior to shear testing. The results indicated that the application of monomer to the surface prior to bonding did not influence the bond strength. Grit blasting was found to significantly increase the bond strength.
Item Type:
Article
Language:
en
MeSH:
Acrylic Resins; Aluminum Oxide; Dental Restoration Failure; Dental Stress Analysis; Polymethacrylic Acids; Self-Curing of Dental Resins; Shear Strength; Surface Properties; Tooth, Artificial
ISSN:
0965-7452

Full metadata record

DC FieldValue Language
dc.contributor.authorNagle, Susanen
dc.contributor.authorRay, Noel Jen
dc.contributor.authorBurke, Francis Men
dc.contributor.authorGorman, Catherine Men
dc.date.accessioned2011-03-11T14:44:55Z-
dc.date.available2011-03-11T14:44:55Z-
dc.date.issued2009-09-
dc.identifier.citationBonding auto-polymerising acrylic resin to acrylic denture teeth. 2009, 17 (3):134-6 Eur J Prosthodont Restor Denten
dc.identifier.issn0965-7452-
dc.identifier.pmid19839190-
dc.identifier.urihttp://hdl.handle.net/10147/124257-
dc.description.abstractThis study investigated the effect of surface treatments on the shear bond strength of an auto-polymerising acrylic resin cured to acrylic denture teeth. The surface treatments included a combination of grit-blasting and/or wetting the surface with monomer. Samples were prepared and then stored in water prior to shear testing. The results indicated that the application of monomer to the surface prior to bonding did not influence the bond strength. Grit blasting was found to significantly increase the bond strength.-
dc.language.isoenen
dc.subject.meshAcrylic Resins-
dc.subject.meshAluminum Oxide-
dc.subject.meshDental Restoration Failure-
dc.subject.meshDental Stress Analysis-
dc.subject.meshPolymethacrylic Acids-
dc.subject.meshSelf-Curing of Dental Resins-
dc.subject.meshShear Strength-
dc.subject.meshSurface Properties-
dc.subject.meshTooth, Artificial-
dc.titleBonding auto-polymerising acrylic resin to acrylic denture teeth.en
dc.typeArticleen
dc.contributor.departmentUniversity Dental School and Hospital, University College Cork, Ireland.en
dc.identifier.journalThe European journal of prosthodontics and restorative dentistryen
dc.description.provinceMunster-

Related articles on PubMed

All Items in Lenus, The Irish Health Repository are protected by copyright, with all rights reserved, unless otherwise indicated.